34652_07 Datasheet, PDF (4/26 Pages) Freescale Semiconductor, Inc – 2.0 A Negative Voltage Hot Swap Controller with Enhanced Programmability

ELECTRICAL CHARACTERISTICS
MAXIMUM RATINGS
ELECTRICAL CHARACTERISTICS
MAXIMUM RATINGS
Table 2. Maximum Ratings
All voltages are with respect to ground unless otherwise noted. Exceeding these ratings may cause a malfunction or
permanent damage to the device.
Ratings
Symbol
Value
Unit
ELECTRICAL RATINGS
Power Supply Voltage
Power MOSFET Energy Capability
Continuous Output Current ⁽²⁾
Maximum Voltage
DISABLE Pin
UV Pin
OV, ILIM, ICHG, and TIMER Pins
PG Pin (V_PG - V_IN)
PG Pin (V_PG - V_IN)
All Pins Minimum Voltage
PG, PG Maximum Current
ESD Voltage, All Pins ⁽³⁾
Human Body Model
Machine Model
V_PWR
85
V
E_MOSFET
Varies ⁽¹⁾
mJ
I_{O (CONT)}
2.0
A
V
—
V_IN - 0.3 to V_PWR + 5.5
—
7.0
—
5.0
—
85
—
85
—
- 0.3
V
—
Internally Limited
A
V
V_ESD3
± 2000
V_ESD4
± 200
THERMAL RATINGS
Storage Temperature
Operating Temperature
Ambient ⁽⁴⁾
Junction
T_STG
- 65 to 150
°C
°C
T_A
- 40 to 85
T_J
- 40 to 160
Notes
1. Refer to the section titled Power MOSFET Energy Capability on page 23 for a detailed explanation on this parameter.
2. Continuous output current capability so long as T_J is ≤ 160°C.
3. ESD1 testing is performed in accordance with the Human Body Model (C_ZAP=100pF, R_ZAP=1500 Ω), ESD2 testing is performed in
accordance with the Machine Model (C_ZAP = 200 pF, R_ZAP = 0 Ω).
4. The limiting factor is junction temperature, taking into account power dissipation, thermal resistance, and heatsinking.
34652
4
Analog Integrated Circuit Device Data
Freescale Semiconductor