33988 Datasheet, PDF (5/34 Pages) Freescale Semiconductor, Inc – Dual Intelligent High-current Self-protected Silicon High Side Switch (8.0mΩ)

ELECTRICAL CHARACTERISTICS
MAXIMUM RATINGS
ELECTRICAL CHARACTERISTICS
MAXIMUM RATINGS
Table 2. Maximum Ratings
All voltages are with respect to ground unless otherwise noted.
Rating
Symbol
Value
Unit
ELECTRICAL RATINGS
Operating Voltage Range
Steady-State
VDD Supply Voltage
Input/Output Voltage⁽¹⁾
SO Output Voltage⁽¹⁾
WAKE Input Clamp Current
CSNS Input Clamp Current
Output Voltage
Positive
Negative
Output Current⁽²⁾
Output Clamp Energy⁽³⁾
ESD Voltage⁽⁴⁾
Human Body Model (HBM)
Charge Device Model (CDM)
Corner Pins (1, 12, 15, 16)
All Other Pins (2, 11, 13, 14)
V_PWR
V
-16 to 41
V_DD
-0.3 to 5.5
V
V_IN[0:1], RST, FSI
- 0.3 to 7.0
V
CSNS, SI, SCLK,
CS, FS
V_SO
- 0.3 to V_DD + 0.3
V
I_CL(WAKE)
2.5
mA
I_CL(CSNS)
10
mA
V_HS
V
41
-15
I_HS[0:1]
E_CL[0:1]
V_ESD1
V_ESD3
30
A
0.37
J
V
± 2000
±750
±500
Notes
1. Exceeding this voltage limit may cause permanent damage to the device.
2. Continuous high side output current rating so long as maximum junction temperature is not exceeded. Calculation of maximum output
current using package thermal resistance is required.
3. Active clamp energy using single-pulse method (L = 16mH, R_L = 0, V_PWR = 12V, T_J = 150°C).
4. ESD1 testing is performed in accordance with the Human Body Model (HBM) (C_ZAP = 100pF, R_ZAP = 1500Ω); ESD3 testing is performed
in accordance with the Charge Device Model (CDM), Robotic (Czap=4.0pF).
Analog Integrated Circuit Device Data
Freescale Semiconductor
33988
5