MC13883_10 Datasheet, PDF (1/64 Pages) Freescale Semiconductor, Inc – Integrated Charger USB Interface

Freescale Semiconductor
Technical Data
Document Number: MC13883
Rev. 3, 02/2010
MC13883
MC13883
Integrated Charger USB Interface
Package Information
Plastic Package
Case 1624
Ordering Information
Device
MC13883EP4
Device Marking or
Operating
Temperature Range
-30 to +85° C
Package
QFN-40
1 Introduction
The MC13883 integrated charger, USB on-the-go
transceiver, and carkit interface incorporates support for
the CEA-936-A carkit specification. The MC13883
provides charging from a variety of sources, USB
connectivity (including on-the-go, OTG), as well as
support for phone-powered accessories. The MC13883
is an “all in one” IC that integrates nearly the entire
interface, Li-Ion battery charging, and transceiver
circuitry required to support these functions.
Contents
1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . 1
2 Signal Descriptions . . . . . . . . . . . . . . . . . . . . 4
3 Electrical Characteristics . . . . . . . . . . . . . . . 6
4 Power Architecture . . . . . . . . . . . . . . . . . . . . 7
5 Connectivity . . . . . . . . . . . . . . . . . . . . . . . . . 29
6 Serial Interface . . . . . . . . . . . . . . . . . . . . . . . 48
7 SPI/I2C Register Tables . . . . . . . . . . . . . . . . 54
8 Packaging Information . . . . . . . . . . . . . . . . . 60
9 Product Documentation . . . . . . . . . . . . . . . . 64
1.1 Key Features
• Allows charging of the phone through the USB
connector
• Over-voltage protection for protecting the phone
from faulty (high voltage) charging sources
• Reverse mode for charge path allows power to be
sourced to the VBUS pin from the battery. This
can be used to support phone powered device as
described in the CEA-936-A standard.
• USB 2.0/OTG transceiver
Freescale reserves the right to change the detail specifications as may be required to permit improvements in the design of its
products.
© Freescale Semiconductor, Inc., 2005–2010. All rights reserved.