V23836-C18-R363 Datasheet, PDF (7/13 Pages) Finisar Corporation. – 1x9 RoHS Compliant Transceiver with Duplex SC Receptacle Single Mode 1310 nm 21 km SONET OC-3/SDH STM-1

V23836-C18-R363 Product Specification – October 2006
Recommended Operating Conditions
Parameter
Ambient Temperature
Power Supply Voltage
Symbol
Values
Unit
min. typ. Max.
T_AMB
0
70
°C
V_CC–V_EE 3.15
3.3 3.6
V
Supply Current¹⁾
5V
3.3 V
Transmitter
I_CC
mA
200 250
150 250
Data Input High Voltage DC/DC V_IH–V_CC –1100
Data Input Low Voltage DC/DC V_IL–V_CC –2000
–740 mV
–1580 mV
Input Data Rise/Fall Time
10% - 90%
Receiver
t_R, t_F
0.4
1.3
ns
Input Center Wavelength
λ_C
1100
1600 nm
Notes:
1) For VCC–VEE (min., max.) 50% duty cycle. The supply current does not include the load drive current of the receiver output.
The electro-optical characteristics described in the following tables are only valid for
useunder the recommended operating conditions.
Transmitter Electro-Optical Characteristics
Parameter
Launched Power (Average)¹⁾
Symbol
min.
PO
–15
Center Wavelength
λ_C
1260
Spectral Width (RMS)
σ_I
Extinction Ratio (Dynamic)
ER
8.2
Reset Threshold²⁾
Eye Diagram³⁾
V_TH
2.7
ED
Values
typ.
max.
–8
1360
7.7
2.9
Compliant
Unit
dBm
nm
nm μ
dB
V
Notes:
1) Into single mode fiber, 9µm diameter
2) Laser power is shut down if power supply is below V_TH min. and switched on if power supply is above V_TH max.
3) Transmitter meets ANSI T1E1.2, SONET OC-3 and ITU-T G.957 mask patterns.
© Finisar Corporation October 2006 Rev. A Preliminary Data
7