V23836-C18-R363 Datasheet, PDF (11/13 Pages) Finisar Corporation. – 1x9 RoHS Compliant Transceiver with Duplex SC Receptacle Single Mode 1310 nm 21 km SONET OC-3/SDH STM-1

V23836-C18-R363 Product Specification – October 2006
This application note assumes Fiber Optic transceivers using 3.3V power supply and
SerDes Chips using either 3.3V or 5V power supply. It also assumes no self biasing at the
receiver data inputs (RD+/RD–) of the SerDes chip (Refer to the manufacturer Product
Specification for other applications).
Value of R1...R4 may vary as long as proper 50Ω termination to VEE or 100Ω
differential is provided. The power supply filtering is required for good EMI
performance. Use short tracks from the inductor L1/L2 to the module V_CCRx/V_CCTx.
Further application notes for electrical interfacing are available upon request. Ask for
Appnote 82.
We strongly recommend a V_EE plane under the module for getting good EMI
performance.
The transceiver contains an automatic shutdown circuit. Reset is only possible if the
power is turned off, and then on again. (V_CCTx switched below V_TH).
© Finisar Corporation October 2006 Rev. A Preliminary Data
11