FWLF1524P2YXX Datasheet, PDF (6/11 Pages) Finisar Corporation. – 4 Gigabit RoHS Compliant CWDM SFP Transceiver

FWLF1524P2yxx SFP Product Specification – April 2012
Finisar
10. Represents sensitivity at minimum Extinction Ratio with rate select low. Measured with PRBS 27-1 at 10-12 BER
11. Rate Selectable version in low bandwidth mode.
12. Rate Selectable version in high bandwidth mode.
V. General Specifications
Parameter
Symbol
Min
Typ
Data Rate
BR
1062
Bit Error Rate
BER
Max. Supported Link Length on
L_MAX1
30
9/125 m SMF @ 4X Fibre Channel
Max. Supported Link Length on
L_MAX2
50
9/125 m SMF @ 1X and 2X Fibre
Channel
Max. Supported Link Length on
L_MAX3
50
9/125 m SMF @ Gigabit Ethernet
Max
4250
10^-12
Units
Mb/sec
km
Ref.
1
2
3
km 3
km 3
Notes:
1. Gigabit Ethernet and 1x/2x/4x Fibre Channel compliant.
2. Tested with a PRBS 2⁷-1 test pattern.
3. A 3 dB penalty is included for dispersion on data rates >2Gb/s amd 2dB penalty is included for data
rates <2Gb/s. Distances are indicative only. Please refer to the Optical Specifications in Table IV to
calculate a more accurate link budget based on specific conditions in your application
VI. Environmental Specifications
Parameter
Case Operating Temperature
Storage Temperature
Symbol
Min
Typ
Max
Units Ref.
T_op
-5
75
°C
T_sto
-40
85
°C
VII. Regulatory Compliance
Finisar transceivers are Class 1 Laser Products and comply with US FDA regulations.
These products are certified by TÜV and CSA to meet the Class 1 eye safety
requirements of EN (IEC) 60825 and the electrical safety requirements of EN (IEC)
60950. Copies of certificates are available at Finisar Corporation upon request.
Finisar Corporation April, 2012 Rev E
Page 6