MC81F4204 Datasheet, PDF (69/150 Pages) Finechips – ABOV SEMICONDUCTOR 8-BIT SINGLE-CHIP MICROCONTROLLERS

R1CONL – R10~11
R1 PORT CONTROL LOW REGISTER
MC81F4204
00D5H
A reset clears the R1CONL register to „00H‟, makes R11-R10 pins input mode. You can use R1CONL
register setting to select input or output mode (open-drain or push-pull) and enable alternative
functions.
When programming the port, please remember that any alternative peripheral I/O function that
defined by the R1CONL register must also be enabled in the associated peripheral module.
7
6
5
4
3
2
1
0
R1CONL
–
–
–
R11
R10
Reset value: 00H
–
–
– R/W R/W R/W R/W R/W
–
bit7 – bit5
R11
R11/AN6/EXT7/PWM2O
R10
R10/Vref/EXT6
Not used for MC81F4204
000: Schmitt trigger input mode (EXT7)
001: Output mode, open-drain
010: Alternative function (AN6)
011: Alternative function (PWM2O)
1xx: Output mode, push-pull
00: Schmitt trigger input mode (EXT6)
01: Output mode, open-drain
10: Alternative function (Vref)
11: Output mode, push-pull
October 19, 2009 Ver.1.35
69