English
Language : 

FXL2SD106_11 Datasheet, PDF (5/11 Pages) Fairchild Semiconductor – Low-Voltage Dual-Supply 6-Bit Voltage Translator with Auto-Direction Sensing
DC Electrical Characteristics (TA = –40°C to +85°C) (Continued)
Symbol Parameter VCCA (V) VCCB (V)
Conditions
Min.
Typ.
Max. Units
ICCB(7)
Quiescent
Supply Current
1.1–3.6
0
0
1.1–3.6
VI = VCCB or GND; IO = 0
VI = VCCA or GND; IO = 0
-2.0
µA
2.0
Notes:
3. This is the output voltage for static conditions. Dynamic drive specifications are given in “Dynamic Output Electrical
Characteristics.”
4. An external driver must source at least the specified current to switch LOW-to-HIGH.
5. An external driver must source at least the specified current to switch HIGH-to-LOW.
6. “Don’t Care” indicates any valid logic level.
7. VCCI is the VCC associated with the input side.
8. Reflects current per supply, VCCA or VCCB.
Dynamic Output Electrical Characteristics(9)
A Port (An)
Output Load: CL = 15pF, RL  1M
Symbol
trise(10)
tfall(11)
IOHD(10)
IOLD(11)
Parameter
Output Rise
Time A Port
Output Fall Time
A Port
Dynamic Output
Current High
Dynamic Output
Current Low
3.0V to 3.6V
Typ. Max.
3.0
3.0
-18.0
+18.0
TA = -40°C to +85°C, VCCA =
2.3V to 2.7V 1.65V to 1.95V 1.4V to 1.6V
Typ. Max. Typ. Max. Typ. Max.
3.5
4.0
5.0
3.5
4.0
5.0
-11.8
-7.4
-5.0
+11.8
+7.4
+5.0
1.1V to 1.3V
Typ.
7.5
7.5
-2.6
+2.6
Units
ns
ns
mA
mA
B Port (Bn, CLK OUT)
Output Load: CL = 15pF, RL  1M
Symbol
trise(10)
tfall(11)
IOHD(10)
IOLD(11)
Parameter
Output Rise
Time B Port
Output Fall Time
B Port
Dynamic Output
Current High
Dynamic Output
Current Low
3.0V to 3.6V
Typ. Max.
3.0
3.0
-18.0
+18.0
TA = -40°C to +85°C, VCCB =
2.3V to 2.7V 1.65V to 1.95V 1.4V to 1.6V
Typ. Max. Typ. Max. Typ. Max.
3.5
4.0
5.0
3.5
4.0
5.0
-11.8
-7.4
-5.0
+11.8
+7.4
+5.0
1.1V to 1.3V
Typ.
7.5
7.5
-2.6
+2.6
Units
ns
ns
mA
mA
Notes:
9. Dynamic Output Characteristics are guaranteed, but not tested.
10. See Figure 5.
11. See Figure 6.
© 2008 Fairchild Semiconductor Corporation
FXL2SD106 • Rev. 1.8.1
5
www.fairchildsemi.com