FOD8160 Datasheet, PDF (4/15 Pages) Fairchild Semiconductor – High Noise Immunity, 3.3 V / 5 V, 10 Mbit/sec, Logic Gate Optocoupler in Wide-Body SOP 5-Pin

Absolute Maximum Ratings
Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be
operable above the recommended operating conditions and stressing the parts to these levels is not recommended.
In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability.
The absolute maximum ratings are stress ratings only. T_A = 25°C unless otherwise specified.
Symbol
Parameter
Value
Units
T_STG
Storage Temperature
-40 to +125
°C
T_OPR
Operating Temperature
-40 to +100
°C
T_J
Junction Temperature
-40 to +125
°C
T_SOL
Lead Solder Temperature
260 for 10 sec
°C
(Refer to Reflow Temperature Profile on page 12)
Input Characteristics
I_F
Average Forward Input Current
V_R
Reverse Input Voltage
PD_I
Input Power Dissipation⁽¹⁾
Output Characteristics
25
mA
5.0
V
45
mW
V_CC
V_O
I_O
PD_O
Supply Voltage
Output Voltage
Average Output Current
Output Power Dissipation⁽¹⁾
0 to 7.0
V
-0.5 to V_CC + 0.5
V
50
mA
85
mW
Note:
1. No derating required up to 100°C.
Recommended Operating Conditions
The Recommended Operating Conditions table defines the conditions for actual device operation. Recommended
operating conditions are specified to ensure optimal performance to the datasheet specifications. Fairchild does not
recommend exceeding them or designing to absolute maximum ratings.
Symbol
Parameter
Min.
T_A
Ambient Operating Temperature
-40
V_CC
Supply Voltages⁽²⁾
3.0
V_FL
Logic Low Input Voltage
0
I_FL
Logic Low Input Current
I_FH
Logic High Input Current
6.0
N
Fan Out (at R_L = 1 kΩ)
R_L
Output Pull-up Resistor
330
Note:
2. 0.1 µF bypass capacitor must be connected between pins 4 and 6.
Max.
+100
5.5
0.8
250
15
5
4,000
Unit
ºC
V
V
µA
mA
TTL loads
Ω
©2012 Fairchild Semiconductor Corporation
FOD8160 Rev. 1.0.1
4
www.fairchildsemi.com