|
FXL2TD245 Datasheet, PDF (3/12 Pages) Fairchild Semiconductor – Low Voltage Dual Supply 2-Bit Signal Translator with Configurable Voltage Supplies and Signal Levels 3-STATE Outputs and Independent | |||
|
◁ |
Absolute Maximum Ratings
The âAbsolute Maximum Ratingsâ are those values beyond which the safety of the device cannot be guaranteed.
The device should not be operated at these limits. The parametric values defined in the Electrical Characteristics
tables are not guaranteed at the absolute maximum ratings. The âRecommended Operating Conditionsâ table will
define the conditions for actual device operation.
Symbol
Parameter
Rating
VCCA, VCCB
VI
VO
IIK
IOK
IOH / IOL
ICC
TSTG
Supply Voltage
DC Input Voltage
I/O Port A
I/O Port B
Control Inputs (T/Rn, OE)
Output Voltage(1)
Outputs 3-STATE
Outputs Active (An)
Outputs Active (Bn)
DC Input Diode Current @ VI < 0V
DC Output Diode Current @
VO < 0V
VO > VCC
DC Output Source/Sink Current
DC VCC or Ground Current per Supply Pin
Storage Temperature Range
-0.5V to +4.6V
-0.5V to +4.6V
-0.5V to +4.6V
-0.5V to +4.6V
-0.5V to +4.6V
-0.5V to VCCA + 0.5V
-0.5V to VCCB + 0.5V
-50mA
-50mA
+50mA
-50mA / +50mA
±100mA
-65°C to +150°C
Recommended Operating Conditions(2)
Symbol
VCCA or VCCB
TA
ât /âV
Parameter
Power Supply Operating
Input Voltage
Port A
Port B
Control Inputs (T/Rn, OE)
Output Current in IOH/IOL with VCC @
3.0V to 3.6V
2.3V to 2.7V
1.65V to 1.95V
1.4V to 1.65V
1.1V to 1.4V
Free Air Operating Temperature
Maximum Input Edge Rate VCCA/B = 1.1V to 3.6V
Notes:
1. IO Absolute Maximum Rating must be observed.
2. All unused inputs and input/output pins must be held at VCCI or GND.
Rating
1.1V to 3.6V
0.0V to 3.6V
0.0V to 3.6V
0.0V to VCCA
±24mA
±18mA
±6mA
±2mA
±0.5mA
-40°C to +85°C
10ns/V
©2005 Fairchild Semiconductor Corporation
FXL2TD245 Rev. 1.0.4
3
www.fairchildsemi.com
|
▷ |