English
Language : 

FOD260L Datasheet, PDF (2/19 Pages) Fairchild Semiconductor – LVTTL/LVCMOS 3.3V High Speed-10 MBit/s Logic Gate Optocouplers
Absolute Maximum Ratings (No derating required up to 85°C)
Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be
operable above the recommended operating conditions and stressing the parts to these levels is not recommended.
In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability.
The absolute maximum ratings are stress ratings only.
Symbol
Parameter
Value
Units
TSTG
TOPR
EMITTER
Storage Temperature
Operating Temperature
-40 to +125
°C
-40 to +85
°C
IF
DC/Average Forward Input Current
50
mA
VE
Enable Input Voltage, not to exceed VCC by more than 500 mV
VCC + 0.5V
V
VR
Reverse Input Voltage
5.0
V
PI
Power Dissipation
45
mW
DETECTOR
VCC
Supply Voltage
(1 minute max)
7.0
V
IO
Output Current
VO
Output Voltage
PO
Collector Output Power Dissipation
50
mA
7.0
V
85
mW
Recommended Operating Conditions
Symbol
Parameter
Min.
Max.
Units
IFL
Input Current, Low Level
IFH
Input Current, High Level
VCC
Supply Voltage, Output
VEL
Enable Voltage, Low Level
VEH
Enable Voltage, High Level
TA
Operating Temperature
N
Fan Out (TTL load)
0
250
µA
*6.3
15
mA
3.0
5.5
V
0
0.8
V
2.0
VCC
V
-40
+85
°C
8
RL
Output Pull-up Resistor
330
4K
Ω
*6.3 mA is a guard banded value which allows for at least 20% CTR degradation. Initial input current threshold value is 5.0 mA or less.
©2008 Fairchild Semiconductor Corporation
FOD060L, FOD260L Rev. 1.0.5
2
www.fairchildsemi.com