FOD2200_08 Datasheet, PDF (2/11 Pages) Fairchild Semiconductor – Low Input Current Logic Gate Optocouplers

Absolute Maximum Ratings (T_A = 25°C unless otherwise specified)
Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be
operable above the recommended operating conditions and stressing the parts to these levels is not recommended.
In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability.
The absolute maximum ratings are stress ratings only.
Symbol
Parameter
T_STG
T_OPR
T_SOL
EMITTER
Storage Temperature
Operating Temperature
Lead Solder Temperature (1.6mm below seating plane)
I_{F (PK)} Peak Transient Input Current (≤1µs PW, 300pps)
I_F
Average Forward Input Current
V_R
Reverse Input Voltage
P_D
Output Power Dissipation (No derating required up to 85°C)
DETECTOR
V_CC
Supply Voltage
I_O
Average Output Current
V_E
Three State Enable Voltage
V_O
Output Voltage
P_D
Output Power Dissipation (No derating required up to 85°C)
Value
-40 to +125
-40 to +85
260 for 10 sec
1.0
10
5.0
45
0 to 20
25
-0.5 to 20
-0.5 to 20
150
Units
°C
°C
°C
A
mA
V
mW
V
mA
V
V
mW
Recommended Operating Conditions
The Recommended Operating Conditions table defines the conditions for actual device operation. Recommended
operating conditions are specified to ensure optimal performance to the datasheet specifications. Fairchild does not
recommend exceeding them or designing to absolute maximum ratings.
Symbol
I_F(ON)
I_F(OFF)
V_CC
V_EL
V_EH
T_A
N
Parameter
Forward Input Current
Forward Input Current
Supply Voltage, Output
Enable Voltage, LOW Level
Enable Voltage, HIGH Level
Operating Temperature
Fan Out (TTL Load)
Min.
1.6*
4.5
0
2.0
0
Max.
5
0.1
20
0.8
20
+85
4
Units
mA
mA
V
V
V
°C
*The initial switching threshold is 1.6mA or less. It is recommended that 2.2mA be used to permit at least a 20%
CTR degradation guardband.
©2004 Fairchild Semiconductor Corporation
FOD2200 Rev. 1.0.1
2
www.fairchildsemi.com