FNB43060T2 Datasheet, PDF (1/15 Pages) Fairchild Semiconductor – Motion SPMR 45 Series

FNB43060T2
Motion SPM^® 45 Series
March 2016
Features
• UL Certified No. E209204 (UL1557)
• 600 V - 30 A 3-Phase IGBT Inverter with Integral Gate
Drivers and Protection
• Low Thermal Resistance Using Ceramic Substrate
• Low-Loss, Short-Circuit Rated IGBTs
• Built-In Bootstrap Diodes and Dedicated Vs Pins Sim-
plify PCB Layout
• Built-In NTC Thermistor for Temperature Monitoring
• Separate Open-Emitter Pins from Low-Side IGBTs for
Three-Phase Current Sensing
• Single-Grounded Power Supply
• Isolation Rating: 2000 V_rms / min.
General Description
FNB43060T2 is an advanced Motion SPM^® 45 module
providing a fully-featured, high-performance inverter
output stage for AC Induction, BLDC, and PMSM
motors. These modules integrate optimized gate drive
of the built-in IGBTs to minimize EMI and losses, while
also providing multiple on-module protection features
including under-voltage lockouts, over-current shutdown,
thermal monitoring of drive IC, and fault reporting. The
built-in, high-speed HVIC requires only a single supply
voltage and translates the incoming logic-level gate
inputs to the high-voltage, high-current drive signals
required to properly drive the module's internal IGBTs.
Separate negative IGBT terminals are available for each
phase to support the widest variety of control algorithms.
Applications
• Motion Control - Home Appliance / Industrial Motor
Related Resources
• AN-9084 - Smart Power Module, Motion SPM® 45 H
V3 Series User’s Guilde
• AN-9072 - Smart Power Module Motion SPM® in
SPM45H Thermal Performance Information
• AN-9071 - Smart Power Module Motion SPM® in
SPM45H Mounting Guidance
• AN-9760 - PCB Design Guidance for SPM®
Figure 1. 3D Package Drawing
(Click to Activate 3D Content)
Package Marking and Ordering Information
Device
FNB43060T2
Device Marking
FNB43060T2
Package
SPMAB-C26
Packing Type
Rail
Quantity
12
©2016 Fairchild Semiconductor Corporation
1
FNB43060T2 Rev.1.1
www.fairchildsemi.com