|
FAN4603 Datasheet, PDF (1/12 Pages) Fairchild Semiconductor – 600mA, Fully Integrated, Buck Power Supply Module | |||
|
August 2010
FAN4603
600mA, Fully Integrated, Buck Power Supply Module
Features
 Solder and Play DC/DC Converter;
No External Components Required
 Up to 91% Efficiency
 600mA Output Current Capability
 2.3V to 5.5V Input Voltage Range
 Fixed Output Voltages from 1.0V to 1.8V
 35µA PFM Quiescent Current
 Best-in-Class Load and Line Transient Response
 ±2% PWM DC Voltage Accuracy
 No External Components Required
 High-Efficiency, Low-Ripple, Light-Load PFM
 Thermal Shutdown (TSD), Under-Voltage Lockout,
(UVLO), and Short-Circuit (SCP) Protection
 4.0 x 2.5mm MLP Package
 Maximum Height: 1.1mm
Applications
 POL and Distributed DC-DC Module Applications
 Small Form Factor, Battery-Powered Applications
 POL Core Power for FPGA, DSP, CPU, and GPU with
Fast-Transient, Wide Dynamic Load Requirements
 Wireless Cards, Meters, Hearing Aids, Bluetooth
Headsets, POS Equipment, VOIP, PDAs, MIDs,
Netbooks, and Servers
Description
The FAN4603 is a fully integrated synchronous DC/DC buck
converter that provides up to 600mA of output current over an
input voltage ranging from 2.3V to 5.5V. It provides a fixed
output voltage level ranging from 1.0V to 1.8V. Other voltage
options are available on request.
The FAN4603 converter is offered as an ultra-miniature
âSolder and Playâ solution that requires no external
components and is able to achieve a DC accuracy of ±2%
PWM and an output ripple less than 12mV.
Total footprint is 4.0 x 2.5mm with a maximum height of
1.1mm. It can be used in small battery-powered devices and
applications with distributed DC POL requirements.
At moderate and light loads, pulse frequency modulation is
used to operate the device in power-save mode with a typical
quiescent current of 35µA. Even with such a low quiescent
current, the part exhibits excellent transient response during
large load swings. At higher loads, the system automatically
switches to fixed-frequency control.
In shutdown mode, the supply current drops below 2µA,
reducing power consumption.
Ordering Information
Part Number Output Voltage(1)
FAN4603MM18X
1.82V
FAN4603MM15X
1.5V
FAN4603MM13X
1.3V
FAN4603MM12X
1.23V
FAN4603MM10X
1.0V
Package
6-Lead Molded Leadless Package (MLP),
4 x 2.5 x 1mm
Temperature Range
â40 to 85°C
Packing
Tape and
Reel
Note:
1. Other voltage options are available on request. Contact a Fairchild representative.
© 2009 Fairchild Semiconductor Corporation
FAN4603 ⢠Rev. 1.0.1
www.fairchildsemi.com
|
▷ |