EADOGS102X-6 Datasheet, PDF (8/9 Pages) List of Unclassifed Manufacturers – DOGS GRAPHIC SERIES 102x64 DOTS

EA DOGS102-6
Page 8
DIMENSIONS EA DOGS102-6
ELECTRONIC ASSEMBLY reserves
the right to change specifications
without prior notice. Printing and
typographical errors reserved.
DIMENSIONS EA LED39X41
all dimensions are in mm
ATTENTION
handling precautions!
MOUNTING / ASSEMBLING
First, clip the display and backlight modules together by gently pushing the display pins through the corresponding
holes on the backlight module. Then insert the entire module into the socket, or into the soldering holes on the pcb. The
backlight pins (4 pins at the bottom) must be soldered on the top side as well to ensure good contact between the
modules.
Important:
- The display and the backlight do have in summary 3 protective films. There are some on the top and the bottom of
the display and also one on the backlight. These must be removed.
- LC displays are generally not suited for wave or reflow soldering.Temperatures of over 80°C can cause lasting
damage.
- Make sure that either display nor backlight will never come into contact with any kind of liquid like Fluxer, Cleaner,
Water.
Zeppelinstrasse 19 · D-82205 Gilching · Phone [phone] · Fax: [phone] · www.lcd-module.de · [e-mail]