EADOGS102X-6 Datasheet, PDF (7/9 Pages) List of Unclassifed Manufacturers – DOGS GRAPHIC SERIES 102x64 DOTS

ELECTRONIC ASSEMBLY reserves
the right to change specifications
without prior notice. Printing and
typographical errors reserved.
USB-TEST BOARD EA 9780-2USB
For easy startup, a USB test board is available that can be connected to a
PC.A USB cable andWindows software is supplied with the product.This
allows text and images (BMP) to displayed directly on the connected display.
You will find more information on the test board in the EA 9780-2USB data
sheet.
SIMULATION WITH WINDOWS
A simulator window also displays the contents of the display. The software
can simulate all the displays and colors even without the hardware.You can
download the software free from our website. Note that all functions of the
simulation software do run also without the USB board.
http://www.lcd-module.de/deu/disk/startdog20.zip
EA DOGS102-6
Page 7
TOUCH PANEL EA TOUCH102-1 (OPTIONAL)
An analog touch panel is available as an accessory. It has a self-adhesive material on its rear surface and is simply stuck
onto the display. The connection is made by means of a 4-pin flexible cable for a ZIF connector (e.g. EA WF100-04S)
with a grid of 1.0 mm. Bending radius is defined
with min. 5mm. For optimum readability we
recommend that you use a backlight with the
display.
Interfacing to a processor can be either done by
an external touch panel controller or with a
controller that is featured with
analogue input. The touch panel
is similar to a potentiometer:
connecting a voltage of e.g. 3.3V
to the pins Top-Bottom makes
it possible to read out a voltage
on pin Left or Right which is li-
near to theY-coordinate of the
Specification
Specification
min max Unit
Top-Bottom
Left-Right
Voltage
Current
Linearity
Force
Contact Bounce
Op. Temperatur
Stor. Temperatur
Transmission
Life Time
t.b.d.
t.b.d.
3
5
45
5
-20
-20
75
100000
t.b.d.
t.b.d.
12
25
1,5
65
10
+60
+70
85
Ω
Ω
V
mA
%
g
ms
°C
°C
%
Cycles
pressed point. The X-coordinate will result when the voltage will be
supplied to Left-Right and measurement is done at Top or Bottom.
The pinout of the connecting cable is shown in the drawing.
ZIF CONNECTOR EA WF100-04S
As an accessory for the touch panel we do provide
a ZIF connector (4 pins) with pitch 1.0mm (SMD
type). This connector is a „bottom side contact“ type.
alle dimensions are in mm