AUIRF1405ZS Datasheet, PDF (8/14 Pages) International Rectifier – HEXFET® Power MOSFET

AUIRF1405ZS/L
10000
1000
Duty Cycle = Single Pulse
100
0.01
0.05
10
0.10
Allowed avalanche Current vs
avalanche pulsewidth, tav
assuming ∆ Tj = 25°C due to
avalanche losses
1
1.0E-08
1.0E-07
1.0E-06
1.0E-05
1.0E-04
tav (sec)
1.0E-03
1.0E-02
1.0E-01
Fig 15. Typical Avalanche Current vs.Pulsewidth
300
TOP
Single Pulse
BOTTOM 10% Duty Cycle
250
ID = 75A
200
150
100
50
0
25
50
75
100 125 150 175
Starting TJ , Junction Temperature (°C)
Notes on Repetitive Avalanche Curves , Figures 15, 16:
(For further info, see AN-1005 at www.irf.com)
1. Avalanche failures assumption:
Purely a thermal phenomenon and failure occurs at a
temperature far in excess of T_jmax. This is validated for
every part type.
2. Safe operation in Avalanche is allowed as long asT_jmax is
not exceeded.
3. Equation below based on circuit and waveforms shown in
Figures 12a, 12b.
4. P_{D (ave)} = Average power dissipation per single
avalanche pulse.
5. BV = Rated breakdown voltage (1.3 factor accounts for
voltage increase during avalanche).
6. I_av = Allowable avalanche current.
7. ∆T = Allowable rise in junction temperature, not to exceed
T_jmax (assumed as 25°C in Figure 15, 16).
t_{av =} Average time in avalanche.
D = Duty cycle in avalanche = t_av ·f
Z_thJC(D, t_av) = Transient thermal resistance, see figure 11)
Fig 16. Maximum Avalanche Energy
vs. Temperature
8
P_{D (ave)} = 1/2 ( 1.3·BV·I_av) = DT/ Z_thJC
I_av = 2DT/ [1.3·BV·Z_th]
E_{AS (AR)} = P_{D (ave)}·t_av
www.irf.com