THS3000 Datasheet, PDF (7/12 Pages) List of Unclassifed Manufacturers – Handheld Oscilloscopes

Handheld Oscilloscopes – THS3000 Series
Trigger level range
Any channel
Trigger modes
Edge
Pulse width
Event
Video
Non-interlaced
±4.0 divisions
Positive, negative, or dual slope on any input channel. Coupling includes DC, HF reject, and Noise reject
Trigger on channel 1, width of positive or negative pulses (glitches) that are >, <, =, or ≠ a specified period of time (resolution of
0.01 div with minimum time of 50 ns)
Trigger on n-th occurrence of trigger (N selectable from 2 to 99)
Trigger on channel 1, line number, all lines, odd, even, or all fields on NTSC, PAL, PAL plus, and SECAM signals
Trigger on channel 1, high-res non-interlaced video with line frequencies from 14 kHz to 65 kHz
Acquisition modes
Sample (default)
Glitch detect
Averaging
Roll
Data recorder
Waveform compare
Acquire sampled values
Captures high frequency or glitches as narrow as 8 ns from 5 μs to 120 s / div
Selectable from 2, 4, 8, or 64 waveforms
Scrolls waveforms right to left across the screen at sweep speeds slower than or equal to 4 ms/div
Automatic data logging of 100 triggered records (screens) with date and time stamp. store internally or to a USB device
Visually compare against user-definable reference waveforms or perform automatic pass or fail testing of 1 to 4 channels with data
logging of test results
Automatic setup
Autoset
Autorange
Single-button, automatic setup of all channels for vertical, horizontal, and trigger systems
Continuous auto-setup of vertical, horizontal, and trigger systems that track signal changes
Waveform measurements
Cursors
Automatic measurements
TrendPlot^™
Time, freq (1/T), volts, watts, Rise/Fall time from any input channel or math waveform
21. Up to 4 can be displayed on-screen at any one time. Measurements include:
V DC, V AC_RMS, V AC+DC, V_Peak Max, V_Peak Min, Peak to Peak, A DC, A AC, A AC+DC, Frequency, Rise time (using cursors), Fall
time (using cursors), Phase (between any 2 inputs), Positive pulse width, Negative pulse width, Positive duty cycle, Negative duty
cycle, dBV, dBm into 50 Ω and 600 Ω
Records and graphically displays any 4 automatic scope measurements. store internally or to USB flash drive for recall and analysis
Waveform math
Arithmetic
FFT
Add, subtract, and multiply waveforms
Spectral magnitude. Set FFT vertical scale to Linear or Logarithmic, and FFT window to Automatic, Hamming, Hanning, or None
www.tektronix.com 7