THS3000 Datasheet, PDF (6/12 Pages) List of Unclassifed Manufacturers – Handheld Oscilloscopes

Datasheet
Specifications
Specifications apply to all models unless noted otherwise.
Model overview
THS3014
THS3024
Isolated input channels
4
4
Analog bandwidth (-3 dB)
100 MHz
200 MHz
Rise time
3.5 ns
1.7 ns
Hardware bandwidth limits
20kHz, 20 MHz, or full
Float voltage
Maximum sample rate
1000 V_RMS CAT II / 600 V_RMS CAT III from BNC shell to earth ground
2.5 GS/s (1.25 GS/s 4-ch)
5 GS/s (1.25 GS/s 4-ch)
Maximum record length (all channels) 10,000 points (30,000 points in roll mode (4 ms to 2 min / div))
Vertical system
Input coupling
AC, DC
Input impedance
1 MΩ ±1%, 14 pF ±2 pF
Input sensitivity range
2 mV/div to 100 v/div
Vertical resolution
8 bits
DC gain accuracy
±2.1% of reading +0.04 × range/div for 5 mV/div to 100 V/div
Max BNC input voltage
Max probe voltage (with standard
THP0301-X probe)
(1 MΩ) 300 V_RMS CAT III from BNC signal to BNC shell
300 V_RMS CAT III from 10:1 probe tip signal to BNC and reference lead
Trace positioning
±4 divisions
Horizontal system
Time base range (s/div)
THS3014
THS3024
Delay time range
Timing accuracy
Zoom
2 ns to 4 s
1 ns to 4 s
1 full screen (12 divisions) of pre-trigger or up to 100 screens (1,200 divisions) of post-trigger
±100 ppm + 0.04 div
Horizontally expand or compress a live or stopped waveform
Trigger system
Input source
Main trigger modes
Trigger coupling
Trigger sensitivity, internal DC
coupled
THS3024
THS3014
Channel 1, 2, 3, or 4. All input references isolated from each other and earth ground
Auto-level, Auto, Normal, and Single
DC, HF reject, Noise reject (reduces sensitivity)
0.5 divisions from DC to 5 MHz at >5 mV/div
1 divisions >5 MHz to 200 MHz (THS3024)
1 divisions >5 MHz to 100 MHz
6 www.tektronix.com