M10382 Datasheet, PDF (7/27 Pages) List of Unclassifed Manufacturers – GPS RADIONOVA RF Antenna Module

®
m2m
Pin out Description
GPS RADIONOVA^® RF Antenna Module
Part No. M10382
Table 1 shows the designation and function of each pin on the M10382 module. Please note that several pins
have multiple functions.
Pin Designator Corresponding u-blox full name
and description
Power
Domain
I/O Reset
I/O
Power Off
1
ANT_IN
RF from external matching circuit
back into module
Input
Input
2
GND
3
ANT_OUT
RF from on-board antenna to
external matching
Output
Output
4
GND
DC supply to digital I/O. Sets the
5
VIO
voltage used by the I/O. VIO must be
supplied in order for the system to
VIO
Input
Input
boot.
6
USB_DP I/O Differential USB D+
VDD_USB
7
USB_DM I/O Differential USB D-
VDD_USB
MISO/PIO20/CFG_COM1:
• I/O SPI MISO
8
SO
• CFG_COM1 (see Table 4)
VIO
Input
Pull-up
Input
Pull-up
• PIO20
SPI Clock signal
• I/O SPI Clock
9
CFG_GPS0/ _{• CFG_GPS0 to toggle Max}
SCK
performance/ECO mode (see Table
VIO
Input
Pull-up
Input
Pull-up
3)
• PIO21
PIO6/SS_N/SCSO_N
10 SPI SELECT • I/O SPI Chip/Slave Select
• PIO6
PIO5/TXD1
11
TX
• Output UART1 TxD
• PIO6
12
V_TH
Reset Threshold Analog
PIO4/RXD1
VIO
VIO
VDD_B
Input
Pull-up
Input
Pull-up
Input
Pull-up
Input
Pull-up
• Input UART 1 RxD
13
RX
• PIO4
VIO
Input
Pull-up
Input
Pull-up
• Wake-up
14
GND
15
V_BCKP Supplies RTC and back-up RAM
MOSI/PIO19/CFG_COM0:
VDD_B
• I/O SPI MOSI
16
SI
• CFG_COM0 (see Table 4)
VIO
Input
Pull-up
Input
Pull-up
• PIO119
Antennas for Wireless M2M Applications

Product Specification 11MD-0043-4-PS