108-106094 Datasheet, PDF (7/17 Pages) List of Unclassifed Manufacturers – Product Specification

Product Specification
108-106094
No.
Test Items
Requirements
Procedures
No.
Test Items
Requirements
3.5.10
Contact Retention Force
19.8N(2kgf) Min.
Apply an axial pull-off load to crimped wire.
Operation Speed : 100 mm / min.
AMP Spec. 109-5210
3.5.11
Contact Mate/Unmating Force
Mate
5.88N(600g)Max.(1st～30th)
Unmating
0.34N(35g)Min. (1st)
0.25N(25g)Min. (30th)
Procedures
No.
Test Items
Requirements
Measured by gage tab (Fig. 10) and operation speed 100 mm/min
AMP Spec. 109-5206
3.5.12
Crimp Tensile Strength
Wire Size
mm²
(AWG)
0.22
24
0.31
22
0.51
20
Crimp Tensil (min.)
N (kgf)
29.4(3)
49(5)
58.8 (6)
Procedures
Fig. 3
Apply an axial pull-off load to crimped wire of
contact secured on the tester,
Operation Speed : 100 mm/min.
Subject take insulation barrel away.
AMP Spec. 109-5205
(To be Continued)
Rev. A
7 of 17