108-106094 Datasheet, PDF (14/17 Pages) List of Unclassifed Manufacturers – Product Specification

Product Specification
108-106094
4.
Quality Assurance Provisions :
4.1
Test Conditions :
Unless otherwise specified, all the test shall be performed in any combination of the following test conditions.
Temperature :
Relative Humidity :
Atmospheric Pressure :
15～35℃
45～75 %
86.6～106.6 Kpa
Fig. 6
4.2
Tests :
4.2.1 Test Specimens :
The test specimens to be employed for the tests shall be conforming to the requirements specified in the applicable
product drawings. The crimped contacts shall be prepared in accordance with the requirements of applicable
application Specification, 114-5372, Crimping of Grace Signal Connector 3.3mm Pitch on the wires specified in Fig. 7 of
this specification.
4.2.2 Applicable Wires :
The wires to be used for crimping the samples for performance testing shall be conforming to the requirements specified
in Fig. 7.
Calculated
Cross-sectional
Area(mm²)
0.22
0.31
0.53
AWG
24
22
20
Diameter of a
Conductor (mm)
0.16
0.16
0.18
Fig. 7
Number of
Conductors
11
17
21
Insulation Outer
Diameter (mm)
1.4
1.58
1.9
Rev. A
14 of 17