108-106094 Datasheet, PDF (4/17 Pages) List of Unclassifed Manufacturers – Product Specification

Product Specification
108-106094
3.5
Test Requirements and Procedures Summary :
No.
3.5.1
Test Items
Requirements
Procedures
No.
Test Items
Requirements
Procedures
No.
Test Items
Requirements
Procedures
Examination of Product
Meets requirements of product drawing and AMP Specification (114-5372)
After test, no corrosion influence performance.
Visual inspection
No physical damage
Electrical Requirements
3.5.2
Termination Resistance (Low Level)
10 mΩ Max. (Initial)
20 mΩ Max. (Final)
Subject mated contacts assembled in housing to 20mV Max. open circuit at 10mA.
resistance of the wire only away from measurement
Fig. 8.
AMP Spec. 109-5311-1
3.5.3
Take the
Insulation Resistance
1000 MΩ Min. (Initial)
500 MΩ Min. (Final)
Impressed voltage 500 V DC.
Test between adjacent circuits and between the surface of housing and contact of mated
connectors.
AMP Spec. 109-5302
MIL-STD-202, Method 302
Condition B
Fig. 3 (To be Continued)
Rev. A
4 of 17