|
M058SFAN Datasheet, PDF (49/72 Pages) List of Unclassifed Manufacturers – 32-bit Microcontroller | |||
|
◁ |
NuMicroï¤ M058S Series Datasheet
6.12 Serial Peripheral Interface (SPI)
6.12.1 Overview
The Serial Peripheral Interface (SPI) applies to synchronous serial data communication and
allows full-duplex transfer. Devices communicate in Master/Slave mode with 4-wire bi-direction
interface. The NuMicroTM M058S contains one set of SPI controllers performing a serial-to-parallel
conversion on data received from a peripheral device, and a parallel-to-serial conversion on data
transmitted to a peripheral device. SPI controller can be configured as a master or a slave device.
6.12.2 Features
ï¬ One set of SPI controllers
ï¬ Supports Master or Slave mode operation
ï¬ Configurable transfer bit length
ï¬ Provides transmit/receive can be transferred up to two times word transaction in one transfer
ï® Provides FIFO buffers
ï¬ Supports MSB or LSB first transfer
ï¬ Supports byte reorder function
ï¬ Supports byte or word suspend mode
ï¬ Supports Slave 3-wire mode
ï¬ SPI bus clock rate can be configured to equal the system clock rate
Nov. 27, 2014
Page 49 of 72
Rev.1.03
|
▷ |