IL-P3 Datasheet, PDF (4/14 Pages) List of Unclassifed Manufacturers – Image Sensors

IL-P3
Line Scan Sensors
For product information and updates visit www.dalsa.com
Parameter
Table 4. IL-P3 Absolute Maximum Ratings
Unit
Min.
Storage Temp
°C
-20
Operating Temp
°C
-20
Voltage on CR1, CR2, VSTOR, TCK, PR, VLS with
V
respect to VBB
Voltage on OS, VDD, VOD, VSS, VPR, VHIGH,
V
CRLAST, RST, VSET, VLOW with respect to VBB
Voltage on OSn with respect to VSS
V
-10
0
VDD-8
Amplifier Load Current (I_LOAD)
mA per output
WARNING: Exceeding these values will void product warranty and may damage the device.
Max.
80
60
18
18
VDD+1
20
CAUTION! These devices are sensitive to damage from electrostatic discharge (ESD). The leads
should be shorted together during storage or handling to prevent damage to the device.
WARNING: To prevent damage to the sensor, a Schottky diode must connect
VBB and VSS. See Figure 7.
Table 5. IL-P3 Input/Output Characteristics
Capacitance to VBB 
Input Characteristics:
Unit
Typical
from CR1, CR2²
from CRLAST
from RST
from PR
from TCK
512
pF
70
pF
9
pF
7
pF
31
pF
20
1024
125
9
7
53
36
2048
250
9
7
99
70
Output Characteristics:
Output Impedance (R_OUT)³
Amplifier Supply Current (I_DD) ⁴
DC Output Offset (VOS) ⁵
Notes:
W
130W with I_LOAD = 10mA
mA
14mA with I_LOAD = 10mA
V
8.3V with I_LOAD = 10mA
1. Using 1V pk-pk 1MHz signal with +5V DC offset.
2. The two CR1 pins (pins 17 and 18) are internally connected, as are the two CR2 pins (pins 15 and 16).
3. In general, R_OUT(W) ~ 324 * (I_LOAD)^-0.389, I_LOAD in mA.
4. In general, I_DD (mA) = 4 + I_LOAD, I_LOAD in mA.
5. In general, V_OFFSET (V) = 0.0018 * (I_LOAD)² - 0.17 * (I_LOAD) + 9.8, I_LOAD in mA.
"
ISO 9001
DALSA INC.: Phone: [phone] Fax: [phone]
DALSA EUROPE: Phone: [phone] Fax: [phone]
03-36-00166-06
www.dalsa.com