IL-P3 Datasheet, PDF (12/14 Pages) List of Unclassifed Manufacturers – Image Sensors

IL-P3
Line Scan Sensors
For product information and updates visit www.dalsa.com
Notes to Figure 7.
1. Clock drivers are designed to drive only up to a maximum capacitance (C_MAX) at a given clock frequency. If the total
capacitances of CRLAST and CR1 (see Table 5) exceed C_MAX, more than one CR1 driver is required.
2. Clock drivers are designed to drive only up to a maximum capacitance (C_MAX) at a given clock frequency. If the total
capacitances of CR2 (see Table 5) exceed C_MAX, more than one CR2 driver is required.
3. Each pin should be connected to a clock driver, though not necessarily to the same clock driver. If more than one
clock driver is used, it is acceptable to drive each pin from separate drivers.
4. Need to source I_DD = 4 + I_LOAD mA.
5. May have an optional antiblooming level adjustment.
ISO 9001 DALSA maintains a registered quality system meeting the ISO 9001 standard.

ISO 9001
DALSA INC.: Phone: [phone] Fax: [phone]
DALSA EUROPE: Phone: [phone] Fax: [phone]
03-36-00166-06
www.dalsa.com