NUC442JI8AE Datasheet, PDF (35/228 Pages) –

NUC442
ACMP0_P1
A
MPF2
Analog comparator0 positive input pin.
SPI0_CLK
O
MPF3
SPI0 serial clock pin.
SD0_CDn
I
MPF4
SD mode #0 – card detect
HS
Slew
This pad is embedded with “Slew Rate Control”
capability.
60
PE.6
I/O
MFP0
General purpose digital I/O pin.
ADC0_6
A
MPF1
ADC0 analog input.
ACMP0_P0
A
MPF2
Analog comparator0 positive input pin.
SPI0_MISO0
I/O
MPF3
1st SPI0 MISO (Master In, Slave Out) pin.
SD0_CMD
I/O
MPF4
SD mode #0 – command/response
EBI_nWR
O
MPF7
EBI write enable output pin.
HS
Slew
This pad is embedded with “Slew Rate Control”
capability.
61
PE.7
I/O
MFP0
General purpose digital I/O pin.
ADC0_7
A
MPF1
ADC0 analog input.
ACMP0_N
A
MPF2
Analog comparator0 negative input pin.
SPI0_MOSI0
I/O
MPF3
1st SPI0 MOSI (Master Out, Slave In) pin.
SD0_CLK
O
MPF4
SD mode #0 – clock.
EBI_nRD
O
MPF7
EBI read enable output pin.
HS
Slew
This pad is embedded with “Slew Rate Control”
capability.
62
AVSS
63
VREF
P
MFP0
Ground pin for digital circuit.
A
MFP0
Voltage reference input for ADC.
Note: This pin needs to be connected with
0.1uF/10uF capacitors.
64
AVDD
P
MFP0
Power supply for internal analog circuit.
Note: Pin Type I = Digital Input, O = Digital Output; A = Analog Pin; P = Power Pin;
June 16, 2016
Page 35 of 228
Rev 1.09