ISD9160 Datasheet, PDF (3/23 Pages) List of Unclassifed Manufacturers – ISD Cortex-M0 ChipCorder

ISD9160 Datasheet
1 GENERAL DESCRIPTION
The ISD9160 is a system-on-chip product optimized for low power, audio record and playback with an
embedded ARM® Cortex™-M0 32-bit microcontroller core.
The ISD9160 embeds a Cortex™-M0 core running up to 50 MHz with 145K-byte of non-volatile flash
memory and 12K-byte of embedded SRAM. It also comes equipped with a variety of peripheral
devices, such as Timers, Watchdog Timer (WDT), Real-time Clock (RTC), Peripheral Direct Memory
Access (PDMA), a variety of serial interfaces (UART, SPI/SSP, I²C, I²S), PWM modulators, GPIO,
Analog Comparator, Low Voltage Detector and Brown-out detector.
The ISD9160 comes equipped with a rich set of power saving modes including a Deep Power Down
(DPD) mode drawing less than 1µA. A micro-power 10KHz oscillator can periodically wake up the
device from deep power down to check for other events. A Standby Power Down (SPD) mode can
maintain a real time clock function at less than 10 µA.
For audio functionality the ISD9160 includes a Sigma-Delta ADC with 80dB SNR performance coupled
with a Programmable Gain Amplifier (PGA) capable of a maximum gain of 61dB to enable direct
connection of a microphone. Audio output is provided by a Differential Class D amplifier (DPWM) that
can deliver 1W¹ of power to an 8Ω speaker.
The ISD9160 provides eight analog enabled general purpose IO pins (GPIO). These pins can be
configured to connect to an analog comparator, can be configured as analog current sources or can
be routed to the SDADC for analog conversion. They can also be used as a relaxation oscillator to
perform capacitive touch sensing.
1 _{We suggest implementing thermal protection by utilizing the Temperature Alarm; for details please}
refer to Temperature Alarm in Design Guide.
Release Date: Oct 29, 2011
-3-
Revision V1.20