ZB2BT4 Datasheet, PDF (24/24 Pages) List of Unclassifed Manufacturers – Push Buttons and Operator Interface

Push Buttons and Operator Interface Specifiers Guide
XB2B 22 mm
Mounting Instructions
Mounting Instructions for ZB2B
1. The panel knockout must be 7/8" (22.3 mm) with a panel thickness of 1 to 6 mm (0.04 in to 0.23 in).
No anti-rotation notch is required.
2. Insert the operator through the knockout.
3. Bayonet lock the operator into the diecast mounting base with a 1/8 clockwise turn.
4. Orient the angled fixing screws at 12 and 6 o’clock and alternately tighten the 2 screws.
5. The fixing screws will bite into the metal of the inside panel door and provide anti-rotation and a
tamper proof installation.
+0.4
22.3 mm –0.0
1 6 mm
FFoorrLrnXiemeBpwi4ltaea(cpdpeapAmglvieecana3iltt7aiuob-sni7lesi2to,y)unslye.
336
© 1999 - 2000 Schneider Electric All Rights Reserved
11/00
Courtesy of Steven Engineering, Inc. ! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: [phone] ! Outside Local Area: [phone] ! www.stevenengineering.com