SP12N002 Datasheet, PDF (23/23 Pages) –

13. PRECAUTION FOR USE
(1) A limited sample should be provided by the both parties on an occasion when
the both parties agreed its necessity.
Judgement by a limit sample shall take effect after the limited sample has
established and confirmed by the both parties.
(2) In the following occasion, the handling of the problem should be decided
through discussion and agreement between responsible persons of the both
parties.
(1) When a question is arisen in the specifications.
(2) When a new problem is arisen that is not specified in this specifications.
(3) When an inspection specifications change or operating condition change
in customer is reported to KOE, and some problems are arisen in this
specification due to the change.
(4) When a new problem is arisen at the customer‘s operating set for sample
evaluation in the customer side.
(3) Regarding the treatment for maintenance and repairing, both parties will discuss
it in six months later after latest delivery of this product.
The precaution that should be observed when handling LCM has been explained above.
If any points are unclear or if you have any requests , please contact with KOE.
KAOHSIUNG OPTO-ELECTRONICS INC.
SHEET
NO.
7B64PS 2713-SP12N002-5
PAGE 13-1/1