M10478 Datasheet, PDF (22/30 Pages) List of Unclassifed Manufacturers – GPS RADIONOVA® RF Antenna Module

®
m2m
GPS RADIONOVA^® RF Antenna Module
Part No. M10478
• For an offset closer to the PCB edge to the left side of the module, a minimum of 15mm distance is
required to the edge of the host PCB. This additional distance is due to the matching circuit placement.
≥15mm
Space needed for
external matching
circuit
Left Side Edge Offset
• The antenna uses the host PCB ground to effectively radiate. As such, a GND plane must be placed
on the host PCB on at least one layer.
• In the example below, the only area void of GND is the antenna keep-out area.
Antenna keep-out area
Antennas for Wireless M2M Applications
22
Product Specification 12MD-0050-2-PS