PS20230 Datasheet, PDF (20/26 Pages) List of Unclassifed Manufacturers – COFDM demodulator with USB interface for PC-TV

PS20230
9 Electrical characteristics
Test conditions unless otherwise stated.
Tamb = 0 - 70ºC, Vdd = 3.3V ± 5% and 1.8V ± 5%
9.1 Recommended Operating Conditions
Table 2 Recommended operating conditions
Symbol
Parameter
Min
Typ
Max
Units
VDD
Power supply voltage:
periphery
3.14
3.3
3.47
V
CVDD
IDD_P
IDD_C
XTI
Power supply current:
Crystal frequency
core
Periphery^[1]
core^[2]
1.71
- 100ppm
1.8
1.89
V
50
mA
185
mA
24.0 + 100ppm MHz
TOP
Operating ambient temperature
0
-
70
ºC
TRESET
Rja
Reset Time after Valid Power
Theta-JA (θJA), Still Air ³
Vcc MIN = 3.0V
40
-
90
mS
44
ºC /W
[1]
Current from the 3.3 V supply will be dependent on the external loads.
[2]
Decoding 8k, 64QAM, guard interval 1/4, code rate 2/3.
[3]
Theta-JA (θJA) is the junction-to-ambient thermal resistance, when the package is mounted on a four-layer JEDEC
standard test board with no airflow and dissipating maximum power.
Neither performance nor reliability is guaranteed outside these limits. Extended operation outside these limits might adversely
affect device reliability.
9.2 Absolute Maximum Ratings
Table 3 Absolute maximum ratings
Symbol
Parameter
Min
Max
Units
VDD
Power supply voltage:
periphery -0.5
5.0
V
CVDD
core -0.5
2.5
V
V_I
Voltage on input pins (5 V rated)
V_I
Voltage on input pins (3.3 V rated)
V_O
Voltage on input pins (5 V rated)
V_O
Voltage on input pins (3.3 V rated)
TSTG
Storage temperature
-0.5
7.0
V
-0.5
VDD + 0.5 V
-0.5
7.0
V
-0.5
VDD + 0.5 V
-55
150
ºC
T_J
Junction temperature
-40
125
ºC
Note: Stresses exceeding these listed under absolute maximum ratings may induce failure. Exposure to absolute maximum ratings
for extended periods may reduce reliability. Functionality at or above these conditions is not implied.
PLESSEY SEMICONDUCTORS LTD
TAMERTON ROAD | ROBOROUGH | PLYMOUTH | DEVON | PL6 7BQ
20