PI33XX-X0 Datasheet, PDF (20/42 Pages) List of Unclassifed Manufacturers – 8V to 36Vin Cool-Power ZVS B uck Regulator Family

PI33XX-X0
PI3302-X0 (5.0 Vout) Electrical Characteristics
Specifications apply for -40C < T_J < 125C, Vin =24V, L1=200nH (Note 1) unless other conditions are noted.
Parameter
Input Specifications
Input Voltage
Input Current
Input Voltage Slew Rate
Input Current At Output Short
(fault condition duty cycle)
Symbol
V_{IN_DC}
I_{IN_DC}
V_{IN_SR}
I_{IN_Short}
Input Quiescent Current
I_{Q_VIN}
Input Voltage Slew Rate
Output Specifications
Output Voltage Total Regulation
Output Voltage Trim Range
Line Regulation
Load Regulation
Output Voltage Ripple
Continuous Output Current Range
Current Limit
Protection
UVLO Start Threshold
UVLO Stop Threshold
UVLO Hysteresis
OVLO Threshold
OVLO Hysteresis
V_{IN_SR}
V_{OUT_DC}
∆V_OUT(∆V_IN)
∆V_OUT(∆I_OUT)
V_{OUT_AC}
I_{OUT_DC}
I_{OUT_CL}
V_{UVLO_START}
V_{UVLO_STOP}
V_{UVLO_HYS}
V_OVLO
V_{OVLO_HYS}
UVLO/OVLO Fault Delay Time
t_{f_DLY}
UVLO/OVLO Response Time
t_f
Output Over Voltage Protection
V_OVP
Over-Temperature Fault Threshold
Over-Temperature Restart
Hysteresis
T_OTP
T_{OTP_HYS}
Note 1: All parameters reflect regulator and inductor system
performance. Measurements were made using a standard PI33XX
evaluation board with 3x4” dimensions and 4 layer, 2oz copper.
Refer to inductor pairing table within Application Description
section for specific inductor manufacturer and value.
Note 2: Regulator is assured to meet performance specifications
by design, test correlation, characterization, and/or statistical
process control.
Min Typ Max Units Conditions
8
24
36
V Note 7.
2.23
A
Vin = 24V, T_C = 25°C,
Iout=10A
1
V/μs
20
mA
2
2.5
mA
Disabled
Enabled (no load)
1
V/μs
4.93 5.00 5.07
V Note 2.
3.3
6.5
V Note 3. Note 7.
0.1 0.15
% @25°C, 8V<Vin<36V
0.1 0.15
% @25°C, 0.5A<Iout<10A
30
mVp-p
Iout=5A, Cout=4x47μF
20MHz BW Note 4.
10
A Note 5. Note 7.
12
A
7.20 7.60 8.00
V
6.90 7.25 7.60
V
4
5
6
%
37 38.4
V
0.77
V
Number of the
128
Cycles switching frequency
cycles
500
ns +1% overdrive
20
% Above Vout
130 135 140
°C
30
°C
Note 3: Output current capability may be limited and other
performance may vary from noted electrical characteristics when
switching frequency or Vout is modified.
Note 4: Refer to Output Ripple plots.
Note 5: Refer to Load Current vs. Ambient Temperature curves.
Note 6: Refer to Switching Frequency vs. Load current curves.
Note 7: Minimum 5V between Vin-Vout must be maintained or a
minimum load of 3mA required.
vicorpower.com
800 735.6200
Rev 1.4
11/2012
Cool-Power^®
Page 20 of 42