10415 Datasheet, PDF (2/6 Pages) List of Unclassifed Manufacturers – Reztore Topical Antistat Application Instructions

Specifications
Reztore™ Topical Antistat has zero ionic contamination,
which will neither contaminate nor corrode sensitive
components and assemblies.
Ion
Level
(mg/l)
Bromide
<3
Chloride
<1
Fluoride
<0.5
Nitrate  0.5
Nitrite
<0.5
Ortho-phosphate
<5
Sulfate
<3
Limit of Detection
(mg/l)
3
3
0.5
0.5
0.5
5
3
Meets conditions of clean room class 1 for above listed
ion contaminants per FED-STD-209C.
Electrical Properties
Surface Resistance 10E6 ohms to < 1 x 10E9 ohms
per ANSI/ESD S4.1
Triboelectric Charge <200 volts
Charge Decay
.02 sec. FTMS 101C,
Method 4046
Testing
It is recommended to test the surfaces after applying
to ensure that all insulative areas have been coated.
Desco Industries recommends Reztore™ Surface & Mat
Cleaner to thoroughly clean the surface before applying
Reztore™ Topical Antistat. Reztore™ Topical Antistat
is specifically designed to leave behind an antistatic
as well as static dissipative coating of 10⁹ ohms, to
enhance and provide the static safe properties of the
surface. Testing for either surface resistance point to
point (RTT) or resistance to ground (RTG) will indicate if
the surface is coated properly.
FIELD TEST:
For quick and easy verification of surface resistance
we recommend the use of a megohmmeter. These are
available from many Desco Industries companies. For
testing of static fields, we recommend the use of a static
field meter. These instruments are also available from
many Desco Industries companies.
NOTE: Reztore™ Topical Antistat does not have a set
life span. The chemicals are not known to degrade over
time when stored at the proper temperature conditions
as stated in the Material Safety Data Sheet. We also
recommend that the product be stored in its original
container and be sealed when not in use.
Limited Warranty
Desco Industries, Inc. expressly warrants that for a
period of one (1) year from the date of purchase, our
Reztore™ Topical Antistat will be free of defects in
material. Within the warranty period, the material will
be replaced at our option, free of charge. Call our
Customer Service Department at 781-821-8370 or
00 44 (0) 1892-665313 in Europe for a Return Material
Authorization (RMA) and proper shipping instructions
and address. You should include a copy of your original
packing slip, invoice, or other proof of purchase date. Any
material under warranty should be shipped prepaid to the
Desco Industries, Inc. factory. Warranty replacements will
take approximately two weeks.
Warranty Exclusions
THE FOREGOING EXPRESS WARRANTY IS MADE
IN LIEU OF ALL OTHER PRODUCT WARRANTIES,
EXPRESSED AND IMPLIED, INCLUDING
MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE WHICH ARE SPECIFICALLY
DISCLAIMED. The express warranty will not apply to
defects or damage due to accidents, neglect, misuse,
alterations, operator error, or failure to properly maintain,
clean or repair products.
Limit of Liability
In no event will Desco Industries, Inc. or any seller be
responsible or liable for any injury, loss or damage,
direct or consequential, arising out of the use of or the
inability to use the product. Before using, users shall
determine the suitability of the product for their intended
use, and users assume all risk and liability whatsoever in
connection therewith.
DESCO INDUSTRIES INC. • 3651 Walnut Avenue, Chino, CA 91710 • [phone] • Web Site: DescoIndustries.com
TB-7005 Page 2 of 6
© 2012 DESCO INDUSTRIES, INC.
Employee Owned