10415 Datasheet, PDF (1/6 Pages) List of Unclassifed Manufacturers – Reztore Topical Antistat Application Instructions

DESCO INDUSTRIES INC. Technical Bulletin TB-7005
Reztore^™ Topical Antistat
Application Instructions
Made in the
United States of America
Directions
Surfaces:
Apply Reztore™ Topical Antistat to the entire surface
to be treated using either the pump or trigger spray
bottle. Use a lint-free cloth to wipe the surface evenly.
For rough or porous surfaces two coats may be
needed to obtain proper protection.
Figure 1. Reztore™ Topical Antistat
1 quart (1 litre) spray bottle
2.5 Gallon (10 litre) Bag-in-Box
Description
Reztore™ Topical Antistat is a topical antistatic
solution for use on dissipative and non-ESD surfaces.
After Reztore™ Topical Antistat has been applied and
the surface dries, an antistatic and protective static
dissipative coating is left behind. The static dissipative
coating will allow charges to drain off when grounded.
The antistatic properties will reduce triboelectric voltage
to under 200 volts. Reztore™ Topical Antistat will
enhance existing electrical properties of ESD surfaces
and give non-ESD surfaces electrical properties until
the hard coat is worn away. Reztore™ Topical Antistat
does not leave behind any harmful insulative barriers.
General Guidelines
Reztore™ Topical Antistat can be used on a variety of
surfaces, especially surfaces used in a static sensitive
environment. Surfaces include but are not limited to:
rubber, vinyl and polyethylene table and floor mats,
field service kits, laminated table tops, tote boxes,
epoxy, painted surfaces, plexiglass, glass, metal,
3-ring binders, computer screens, computer keyboards,
shelving, push carts, conveyor belts, etc.
Figure 2. Applying Reztore™ Topical Antistat to the
mat.
Other Surfaces - Keyboards:
Dampen a lint-free cloth or a lint-free swab with
Reztore™ Topical Antistat. Wipe surface to be
protected using either the cloth or swab. The swab will
work best for tight spots like between keyboard keys.
Use the cloth to wipe the remaining surfaces of the
keyboard or surface to be protected.
Figure 3. Cleaning a keyboard with Reztore™ Topical
Antistat
When dry, Reztore™ Topical Antistat will leave a
thin protective antistatic, as well as static dissipative
coating on the surface. This enhances existing ESD
surfaces and will give temporary electrical properties to
insulative surfaces.
DESCO INDUSTRIES INC. • 3651 Walnut Avenue, Chino, CA 91710 • [phone] • Web Site: DescoIndustries.com
TB-7005 June 2012 Page 1 of 6
© 2012 DESCO INDUSTRIES, INC.
Employee Owned