RFD21733 Datasheet, PDF (19/76 Pages) List of Unclassifed Manufacturers – Compliance Approved 2.4 GHz RF Transceiver Modules with Built-In RFDP8 Application Protocol

© Copyright, RF Digital
7/10/2011 1:40 AM
Patents Pending
RoHS CE • ESTI
RFD21733 • FCC • IC
RFD21743 • FCC
Approved & Certified
13715 Alton Pkwy • Irvine • CA • 92618
Tel: [phone] • www.RFdigital.com
Fast Answers: [e-mail]
RFDP8
RF Module
RFD21733
RFD21735
RFD21737
RFD21738
RFD21739
RFDP8
RFDANT
RFD21742
RFD21743
RFD21772
RFD21773
KEYFOBs
RFDP8 Mode Selector Switch for all 5 Eval Boards
The 8 different modes of the RFDP8 Application Protocol are selected using the 3-position dip-switch S5 shown in
the examples below. The 3 inputs have resistor pull-downs to ground, so when the switch is in its OFF (open)
position, there is a low (0) on the input. When the switch is in its ON (closed) position, it connects the input to +V,
which produces a high (1).
The proper way to read binary is MSB on the left and LSB on the right. Switch manufacturers label the switches
from left to right and furthermore they commonly start with 1 rather then 0. So careful attention needs to be given
to identify the switch positions. The binary is read from MSB to LSB, rather than LSB to MSB as shown in the
examples below. To remove all doubt, only follow the examples shown below.
Mode 0
Active RFID
Transmitter
OFF OFF OFF
Mode 1
3-Input
Switch Logic
Transmitter
ON
OFF OFF
Mode 2
Serial UART
Transceiver
9600-8N1
ON
OFF
OFF
Mode 3
Serial UART
Transceiver
9600-8N1
Network
ON ON
OFF
Mode 4
3-Output Switch
Logic Receiver
500ms Hang Time
ON
OFF OFF
Mode 5
3-Output Switch
Logic Receiver
500ms Hang Time
Network
ON
ON
OFF
Mode 6
3-Output Switch
Logic Receiver
20ms Hang Time
ON ON
OFF
Mode 7
3-Output Switch
Logic Receiver
20ms Hang Time
Network
ON ON ON
Free Applications Support • Email your application questions to [e-mail]
19