TS55001 Datasheet, PDF (18/22 Pages) List of Unclassifed Manufacturers – High Efficiency Li-Ion Battery Charger

TS55001
Version 1.3
ENABLE CONFIGURATION REGISTER (CONFIG_ENABLE)
Address – 0x11h
DATA BIT
D7
D6
D5
D4
D3
D2
FIELD NAME Not used Not used Not used Not used Not used Not used
READ/WRITE R
R
R
R
R
R
RESET VALUE 0
0
0
0
0
0
D1
Not used
R
0
D0
EN_CFG
R/W
0
FIELD NAME
EN_CFG
BIT DEFINITION
Enable access control bit for configuration registers 2-6
0 – Disable access
1 – Enable access
EEPROM CONTROL REGISTER (EEPROM_CTRL)
Address – 0x12h
DATA BIT
D7
D6
D5
D4
D3
FIELD NAME Not used Not used Not used Not used Not used
READ/WRITE R
R
R
R
R
RESET VALUE 0
0
0
0
0
D2
Not used
R
0
D1
Not used
R
0
D0
EE_PROG
R/W
0
FIELD NAME
BIT DEFINITION
EE_PROG⁽¹⁾
EEprom program control bit for configuration registers 2-6
0 – Disable EEprom programming
1 – Enable EEprom programming with data from configuration registers 2-6
(1) EE_PROG Note: Inputs VIN and EN must be present for 200 ms.
EXTERNAL COMPONENT SELECTION
The internal compensation is optimized for a 4.7uF output capacitor and a 4.7uH inductor. To keep the output ripple low, a
low ESR (less than 35mOhm) ceramic is recommended.
Specifications subject to change
WWW.TRIUNESYSTEMS.COM
- 18 -
Copyright © 2012, Triune Systems, LLC