|
UG-2828GDEDF02 Datasheet, PDF (17/29 Pages) List of Unclassifed Manufacturers – OEL Display Module | |||
|
◁ |
Univision Technology Inc.
3.3 Optics & Electrical Characteristics
Doc. No: SAS1-XXXX-A
Characteristics Symbol Conditions Min Typ Max Unit
Brightness (White)
Lbr
With Polarizer
(Note 3)
70 90
- cd/m2
C.I.E. (White)
(x)
(y)
With Polarizer
0.24 0.28 0.32
0.29 0.33 0.37
C.I.E. (Red)
(x)
(y)
With Polarizer
0.60 0.64 0.68
0.31 0.35 0.39
C.I.E. (Green)
(x)
(y)
With Polarizer
0.26 0.30 0.34
0.61 0.65 0.69
C.I.E. (Blue)
(x)
(y)
With Polarizer
0.10 0.14 0.18
0.15 0.19 0.23
Dark Room Contrast CR
- >1000:1 -
View Angle
>160 - - degree
* Optical Measurement Follow the Software Initial Setting with Sec. 4.4 âInitial
Sequence & Setting Valueâ
3.4 General Electrical Specification
Characteristics Symbol Conditions Min Typ Max Unit
Supply Voltage
Supply Voltage for
I/O Pins
Driver Supply Voltage
VDD
VDDIO
VCC
Note 3
2.6 2.8 3.5 V
1.5 2.8 3.5 V
- 13 - V
Operating Current for
VDD
IDD
Note 4
Note 5
- 2.5 3.5 mA
- 2.5 3.5 mA
Operating Current for
VCC
ICC
Note 4
Note 5
- 19 23 mA
- 30 36 mA
Sleep Mode Current for
VDD
IDD, SLEEP
Sleep
Mode Current
VDDH
for
IDDH,SLEEP
- <1 1 µA
- <1 1 µA
Note 3: Brightness (Lbr) and Driver Supply Voltage (VCC) are subject to the change
of the panel characteristics and the customerâs request.
Note 4: VDD = 2.8V, VCC = 13V, Test condition follow Sec.4.4 âInitial Sequence &
Setting Valueâ, 50% Display Area Turn on.
Note 5: VDD = 2.8V, VCC = 13V, Test condition follow Sec.4.4 âInitial Sequence &
Setting Valueâ, 100% Display Area Turn on.
12
|
▷ |