BXRA-56C0700 Datasheet, PDF (11/24 Pages) List of Unclassifed Manufacturers – Bridgelux ES Star Array Series

Absolute Maximum Ratings
CCT ^[2]
(Kelvin)
2700K
3000K
4000K
5000K
5600K
Table 5: Maximum Current and Reverse Voltage Ratings ^[18]
Part Number ^[1]
BXRA-27E0540-A-03
BXRA-27G0540-A-03
BXRA-27E0740-A-03
BXRA-27G0740-A-03
BXRA-30E0540-A-03
BXRA-30G0540-A-03
BXRA-30E0740-A-03
BXRA-30G0740-A-03
BXRA-40E0600-A-03
BXRA-40E0810-A-03
BXRA-50C1000-A-xx
BXRA-56C0700-A-xx
BXRA-56C1000-A-xx
DC Forward Current for
LM-80 (mA) ^[4,5,6]
350
350
350
350
350
350
350
350
350
350
350
350
350
Maximum Peak
Pulsed Current
(mA) ^{[14, 16]}
700
700
700
700
700
700
700
700
700
700
700
700
700
Maximum Reverse
Voltage
(Vr) ^[15]
-30
-30
-45
-45
-30
-30
-45
-45
-30
-45
-45
-45
-45
Notes for Table 5:
14. Bridgelux recommends a maximum duty cycle of 10% when operating LED Arrays at the
maximum peak pulsed current specified.
15. Light emitting diodes are not designed to be driven in reverse voltage.
16. Maximum peak pulsed currents are values at which the LED Array can be driven without
catastrophic failures.
17. DC Forward Current for LM-80 are the maximum drive currents for which LM-80 data is currently
available.
18. Lumen maintenance (L70) and lifetime predictions are valid for drive current and case
temperature conditions used for LM-80 testing as included in the applicable LM-80 test report for
these arrays.
19. Arrays may be driven at higher currents but lumen maintenance may be reduced
Parameter
LED Junction Temperature
Storage Temperature
Operating Case Temperature
Soldering Temperature^[1]
Table 6: Maximum Ratings
Maximum Rating
150°C
-40°C to +105°C
105°C
350°C or lower for a maximum of 3.5 seconds
Note for Table 6:
1. Refer to Bridgelux Application Note AN15: Reflow Soldering of Bridgelux LED Arrays for solder
procedure (www.Bridgelux.com
Bridgelux ES Star Array Series Product Data Sheet DS23 (8/30/2013 rev2)
Page 11 of 24