591BD-DDG Datasheet, PDF (11/12 Pages) List of Unclassifed Manufacturers – 1 ps MAX JITTER CRYSTAL OSCILLATOR (XO) (10 MHZ TO 810 MHZ)

DOCUMENT CHANGE LIST
Revision 0.2 to Revision 0.25
 Total Stability Maximum changed to ±30 in Table 2
on page 2.
 Total Stability Maximum changed to ±30 in Figure 1
on page 7.
Revision 0.25 to Revision 0.3
 Updated Table 4 on page 3 by adding the
155.51 MHz “Phase Jitter (RMS)
(LVPECL/LVDS/CML)” row.
 Updated and clarified Table 6 on page 4 to correct
typos and include the “Moisture Sensitivity Level”
and “Contact Pads” rows.
 Corrected BSC value in rows D and E in Table 11 on
page 8.
Revision 0.3 to Revision 0.4
 Added ±7 ppm temperature stability ordering option
in Table 4 on page 3 and Figure 1 on page 7.
Revision 0.4 to Revision 1.0
 Updated 2.5 V/3.3 V and 1.8 V CML output level
specifications in Table 3 on page 3.
 Updated Si590/591 devices to support frequencies
up to 810 MHz for LVPECL, LVDS, and CML
outputs.
 Separated 1.8 V, 2.5 V/3.3 V supply voltage.
specifications for CML output in Table 3 on page 3.
 Updated Note 1 of Table 4 on page 3 to refer to
AN256.
 Updated Table 4 on page 3.
Updated phase jitter specification.
 Updated Table 6 on page 4 to include the "Moisture
Sensitivity Level" and "Contact Pads" rows.
 Updated Figure 3 and Table 13 on page 10 to reflect
specific marking information.
 Added Table 7, “Thermal Characteristics,” on
page 4.
 Rearranged sections to conform to new quality
standard.
Si590/591
Rev. 1.0
11