EEV-FK0J471GP Datasheet, PDF (10/22 Pages) List of Unclassifed Manufacturers – Aluminum Electrolytic Capacitor

Electrolytic Capacitor Product Specification
V type FK series
CE-VFK-BE-33
8
No
Item
13 Endurance
14 Shelf Life
Performance characteristics
Leakage Current :
≦the value of item 6.1.
Capacitance change :
Within ±35% of initial measured value.
Tangent of Loss Aangle (tanδ):
≦300% of the value of item 6.3.
Appearance :
No significant change can be observed.
Leakage Current :
≦the value of item 6.1.
Capacitance Change :
Within ±35% of initial measured value.
Tangent of Loss Angle (tanδ) :
≦300% of the value of item 6.3.
Appearance :
No significant change can be observed.
Test
Test Temperature : 105±2 ℃
Test Duration : 5000⁺⁷²⁰ hours
Applied Voltage : Rated voltage
After subjected to the test, the capacitors shall
be left at room temperature and room humidity
for 2 hours prior to the measurement.
Test Temperature : 105±2 ℃
Test Duration : 1000⁺⁴⁸⁰ hours
After subjected to the test, D.C. rated
voltage shall be applied to the capacitors for
30 minutes as post-test treatment after left
at the room temperature and humidity for 2
hours prior to the measurement.
　　　　　* Voltage treatment : The rated voltage shall be applied to the capacitors, which are connected to series protective
　　　　　　　　　　　　 resistors (1000±10 Ω), for 30 minutes as a posttest treatment (performing discharge).
Matsushita Electronic Components Co.,Ltd.　LCR Device Company
Capacitor Business Unit.