KXCNL-1010 Datasheet, PDF (1/51 Pages) List of Unclassifed Manufacturers – Accelerometer Specifications

± 2g / 4g / 6g / 8g Tri-axis Digital
Accelerometer Specifications
PART NUMBER:
KXCNL-1010
Rev 3.0
Product Description
The KXCNL-1010 is a tri-axis +/-2g, +/-4g, +/-6g, or +/-8g silicon micromachined accelerometer with
integrated programmable state machines. The sense element is fabricated using Kionix’s
proprietary plasma micromachining process technology. Acceleration sensing is based on the
principle of a differential capacitance arising from acceleration-induced motion of the sense
element, which further utilizes common mode cancellation to decrease errors from process
variation, temperature, and environmental stress. The sense element is hermetically sealed at the
wafer level by bonding a second silicon lid wafer to the device using a glass frit. A separate ASIC
device packaged with the sense element provides signal conditioning, and intelligent user-
programmable state machines. The accelerometer is delivered in a 3 x 3 x 0.9 mm LGA plastic
package operating from a 1.8 – 3.6V DC supply. I²C interface is used to communicate to the chip to
load state programs, configure settings, and check updates to the acceleration data.
Functional Diagram
36 Thornwood Dr. – Ithaca, NY 14850
tel: [phone] – fax:[phone]
www.kionix.com - [e-mail]
© 2013 Kionix – All Rights Reserved
1.0
Page 1 of 51