JKXFD1G05MCSM Datasheet, PDF (1/10 Pages) List of Unclassifed Manufacturers – Wire gauge range from 28 AWG to 14 AWG

JKX Series
Key features
• Sealed IP 68 (mated connectors)
• Mechanically keyed : ensures correct polarization
and alignment.
• Contact arrangements : from 2 to 10 contacts.
• Wire gauge range from 28 AWG to 14 AWG.
• High contact density in a small space.
• Contact termination in either crimp, solder or
PCB contacts.
User advantages
Temporary immersion IP 68
6-collet cluster
Allows a wide range of cable diameter
applications for a single connector.
Reduces inventory variations.
Removable contacts
Crimp versions allow easier wiring and
maintenance.
Part number system
Basic series
JKX FD 1 G 05 M C S D S M
Shell configuration
FD - ER - EP - PC
Size
0-1
Keying
G
Contact layouts
02 ---------- 10 (see page 33)
Contact type
M : pin F : socket (in relation with keying)
Contact termination
Material & surface plating
C : crimp ; S : solder ; P* : straight PCB tails ; Q* : 90° PCB tails ; W : 0.7 mm clipped
solder
S : Outer shell in brass alloy with glossy chrome over nickel
N : Outer shell in brass alloy with black plating (consult us)
D : Obligatory suffix
S : Insulator in PPS
P : Insulator in Peek (for Ø 0.5 mm contacts only)
Obligatory suffix for layouts including contacts of Ø 0.5 mm
Options
M : Connector with backnut for protective boot (protective boot to order separately page 34)
G : Connector adapted to accomodate larger cables (Ø 4.5 to 6 in size 0 and Ø 6 to 8 in size 1)
R : Red dot (possible for FD, PC, ER only)
* For receptacles with female contacts only.
31