ICM108B Datasheet, PDF (9/20 Pages) List of Unclassifed Manufacturers – 1.3 million pixel Color CMOS image sensor

ICM108B 1.3 million pixel CMOS sensor
Data Sheet V 1.1 November, 2002
0x0D
0x0E
0x0F
0x10
0x11
AD_WIDTHH
AD_HEIGHTL
AD_HEIGHTH
AD_COL_BEGINL
AD_COL_BEGINH
0x14
0x15
0x18
0x19
0x1A
0x1B
0x1C
0x1D
0x20
0x21
0x22
0x23
0x24
0x25
0x26
0x27
0x40
0X41
0x42
0x43
0x44
0x45
0x52
AD_ROW_BEGINL
AD_ROW_BEGINH
AD_HSYNC_ENDL
AD_HSYNC_ENDH
AD_VSYNC_ENDL
AD_VSYNC_ENDH
AD_EXPOSE_TIMEL
AD_EXPOSE_TIMEH
AD_M1_L
AD_M1_H
AD_M2_L
AD_M2_H
AD_M3_L
AD_M3_H
AD_M4_L
AD_M4_H
AD_DARK_DATA_L
AD_DARK_DATA_H
AD_HighLimit
AD_LowLimit
AD_INOUTSEL
0x53
0x54
0x55
0x56
0x57
0x82
0x83
AD_RAMPSEL
AD_DSRSTL
AD_DSRSTH
AD_DSDATAL
AD_DSDATAH
AD_IDL
AD_IDH
0x84
0x85
AD_FLASH_BEGINL
AD_FLASH_BEGINH
(1500)
0x044C
(1100)
0x0064
(100)
0x000A
(10)
0x0040
(64)
0x0003
(3)
0x044B
(1099)
0x100
(256)
0x100
(256)
0x100
(256)
0x100
(256)
0
3FF
(1023)
0
0
0
0x0000
(0)
0x07D0
(2000)
0x9080
(36992)
0x040A
(1034)
[15:0] Frame height, should not be less than
AD_ROW_BEGIN + (1034)
[10:0] Beginning of active line in terms of
column position
[11] Mirror image enable
[12] Up-down image enable
[15:0] Beginning of active frame in terms of row
position
[10:0] End of horizontal sync in terms of column
position
[15:0] End of vertical sync in terms of row
position
[15:0] Exposure time in terms of number of rows
[10:0] Gain coefficient (Gr) , in unsigned 3.8
(default) format
[10:0] Gain coefficient (R) , in unsigned 3.8
(default) format
[10:0] Gain coefficient.(B) , in unsigned 3.8
(default) format
[10:0] Gain coefficient.(Gb) , in unsigned 3.8
(default) format
[9:0] When auto dark correction is disabled, serve
as the subtrahend for dark correction
[9:0] Apply dead pixel removal algorithm only to
those pixel above HighLimit
[9:0] Apply dead pixel removal algorithm only to
those pixel below LowLimit
[4:0] Output format
0: default, unsigned 3.8 format
1: default, unsigned 4.7 format
2: default, unsigned 5.6 format
3: default, unsigned 6.5 format
0-7: 10-bit raw data
8: control signals
9: row address
10: column address
11: dead pixel removal algorithm enable
12: sub-sampling data output (1/16 format)
13: sub-sampling data output (1/4 format)
14-31: Reserverd
reserved
[10:0] Reserverd
[10:0] Reserverd
[3:0] Sub ID, Read from pins DOUT[4:1] during
reset
[15:4] Device ID, default 0x908 , can be
configured using SIF
[15:0] Flash light begin position in terms of rows
©2000, 2001, 2002 IC Media Corporation & IC Media Technology Corp.
11/22/2002
page 9
COMPANY CONFIDENTIAL