CCPB-1-15CF Datasheet, PDF (6/6 Pages) Cooper Bussmann, Inc. – Compact Circuit Protector Base

Technical Data 1161
Effective April 2017
CUBEFuse Compact Circuit Protector Base (CCPB)
for Quik–Spec™ Coordination Panelboards
The only controlled copy of this Data Sheet is the electronic read-only version located on the Eaton Network Drive. All other copies of this document
are by definition uncontrolled. This bulletin is intended to clearly present comprehensive product data and provide technical information that will help
the end user with design applications. Eaton reserves the right, without notice, to change design or construction of any products and to discontinue
or limit distribution of any products. Eaton also reserves the right to change or update, without notice, any technical information contained in this
bulletin. Once a product has been selected, it should be tested by the user in all possible applications.
Eaton
1000 Eaton Boulevard
Cleveland, OH 44122
Eaton.com
Bussmann Division
114 Old State Road
Ellisville, MO 63021
United States
Eaton.com/bussmannseries
© 2017 Eaton
All Rights Reserved
Printed in USA
Publication No. 1161 - BU-SB15190
April 2017
Eaton, Bussmann, Quik-Spec and CUBEfuse
are valuable trademarks of Eaton in the U.S.
and other countries. You are not permitted to
use the Eaton trademarks without prior writ-
ten consent of Eaton.
CSA is a registered trademark of the Canadian
Standards Group.
NEC is a registered trademark of the National
Fire Protection Association, Inc.
NEMA is a registered trademark of the
National Electrical Manufacturers Association.
UL is a registered trademark of the
Underwriters Laboratories, Inc.
Follow us on social media to get the
latest product and support information.