CCPB-1-15CF Datasheet, PDF (1/6 Pages) Cooper Bussmann, Inc. – Compact Circuit Protector Base

Technical Data 1161
BUSSMANN
Effective April 2017
Supersedes April 2016
SERIES
CUBEFuse™ Compact Circuit Protector Base (CCPB)
2011/65/EU
Product description:
The revolutionary Bussmann™ series Compact
Circuit Protector Base (CCPB) with CUBEFuse™
is designed as a fused branch circuit disconnect
switch for the Bussmann series Quik-Spec™
Coordination Panelboard. The CCPB with
CUBEFuse simplifies selective coordination
and lockout/tagout provisions allow for isolation
of individual branch circuit loads for safe work
practices.
Features and benefits:
• Uses finger-safe, current-limiting Class CF
CUBEFuse with Class J performance available,
time-delay or fast-acting versions from 1 to 100
amps*
• Patented ampacity rejection feature helps
prevent overfusing
• High 200kA short-circuit current ratings
• Disconnect rated to provide means for load
isolation
• All versions are full voltage rated at 600Vac
• 125Vdc rated for 80A and below
• UL 98 Listed and suitable for branch circuit
disconnect
• 1-, 2- and 3-pole versions are horsepower rated
• Listed to UL and cULus
• Open fuse indication light per pole
• Additional open fuse indication can be provided
by using the time-delay indicating CUBEFuse
version
• Built-in switch/fuse interlock prohibits fuse
removal while energized
• Permanent lockout/tagout provisions
• Lock-On provision available when used in the
Bussmann series Quik-Spec Coordination
Panelboard (QSCP)
* See data sheet 9000 for time-delay CUBEFuse and data
sheet 2147 for fast-acting CUBEFuse specifications.