AF512CFI-7ACXP Datasheet, PDF (6/68 Pages) List of Unclassifed Manufacturers – ATP Industrial Grade CompactFlashCard Specification

Revision 3.6
ATP Industrial Grade CompactFlash Card Specification
1.2 Introduction
By utilizing SLC NAND flash memory and advanced Global Wear Leveling technology, the ATP
Industrial Grade CompactFlash Card has enhanced endurance levels and a longer product lifespan. The
ATP Industrial Grade CF card implements the StaticDataRefresh technology, which monitors the error
bit levels during each read operation to ensure data integrity, and the EarlyRetirement technology
prevents data loss from weak blocks.
The ATP Industrial Grade CF card has also incorporated the S.M.A.R.T. (Self-Monitoring, Analysis,
and Reporting Technology) function which monitors various parameters of endurance and reliability,
indicating activity that is out of the normal range. This information helps predict storage failure for
preventative action.
Patent ATP PowerProtector technology is implemented in ATP industrial grade CF card to ensure a
sufficient amount of backup power during power abnormalities to minimize the risk of data loss or
firmware corruption.
1.3 Main Features
 Host Interface:
λ Compliance with CF specification 4.1
λ Pre-screened Single Level Cell (SLC) NAND flash memory
λ True IDE mode compatible:
Support PIO mode 0~6, MDMA mode 0~2, UDMA mode 0~4
 High performance:
λ Sequential read up to 51MByte/s (UDMA 4, Flash number x 2)
λ Sequential write up to 25MByte/s (UDMA 4, Flash number x 2)
λ Capacity: 512MB to 32GB
 Industrial grade temp.: -40^oC to 85^oC
 Endurance:
λ Enhanced endurance by Global wear leveling and bad block management
λ 13/24 bit BCH-ECC engines can correct up to 24 bit errors per 1,024 byte data
λ MTBF > 5,000,000 hours (@25^oC)
λ Data reliability: Bit error rate 10E-15 (NAND flash)
Your Ultimate Memory Solution!
6
ATP Confidential & Proprietary