AF512CFI-7ACXP Datasheet, PDF (49/68 Pages) List of Unclassifed Manufacturers – ATP Industrial Grade CompactFlashCard Specification

Revision 3.6
ATP Industrial Grade CompactFlash Card Specification
Initiating an Ultra DMA Data-Out Burst
ALL WAVEFORMS IN THIS DIAGRAM ARE SHOWN WITH THE ASSERTED STATE HIGH.NEGATIVE
TRUE SIGNALS APPEAR INVERTED ON THE BUS RELATIVE TO THE DIAGRAM.
Note:
The definitions for the STOP, DDMARDY, and HSTROBE signal lines are not in effect until DMARQ and DMACK
are asserted. A[02:00], -CS0 & -CS1 are True IDE mode signal definitions. A[10:00], -CE1 and -CE2 are PC Card
mode signal definitions. The bus polarity of DMARQ and DMACK depend on the active interface mode.
Figure 3-14: Ultra DMA Data-Out Burst Initiation Timing
Your Ultimate Memory Solution!
49
ATP Confidential & Proprietary