M38510-101J Datasheet, PDF (2/43 Pages) List of Unclassifed Manufacturers – MICROCIRCUITS, LINEAR, OPERATIONAL AMPLIFIER, MONOLITHIC SILICON

MIL-M-38510/101J
1.2.3 Case outlines. The case outlines shall be designated in MIL-STD-1835 and as follows:
Outline letter
Descriptive designator
Terminals
Package style
A 2/
B 2/
C
D
E
F
G
H
I
P
Z
2
GDFP5-F14 or CDFP6-F14
14
GDFP4-14
14
GDIP1-T14 or CDIP2-T14
14
GDFP1-F14 or CDFP2-F14
14
GDIP1-T16 or CDIP2-T16
16
GDFP2-F16 or CDFP3-F16
16
MACY1-X8
8
GDFP1-F10 or CDFP2-F10
10
MACY1-X10
10
GDIP1-T8 or CDIP2-T8
8
GDFP1-G10
10
CQCC1-N20
20
Flat pack
Flat pack
Dual-in-line
Flat pack
Dual-in-line
Flat pack
Can
Flat pack
Can
Dual-in-line
Flat pack with gullwing leads
Square leadless chip carrier
1.3 Absolute maximum ratings.
Supply voltage range (V_CC)............................................................................. ±22 V dc 3/
Input voltage range ......................................................................................... ±20 V dc 4/
Differential input voltage range ....................................................................... ±30 V dc 5/
Input current range ......................................................................................... -0.1 mA to +10 mA
Storage temperature range ............................................................................. -65°C to +150°C
Output short-circuit duration ............................................................................ Unlimited 6/
Lead temperature (soldering, 60 seconds) ..................................................... +300°C
Junction temperature (T_J) ............................................................................... +175°C 7/
1.4 Recommended operating conditions.
Supply voltage (V_CC) ...................................................................................... ±5 V dc to ±20 V dc
Ambient temperature range (T_A) .................................................................... -55°C to +125°C
______
2/ Inactive package case outline.
3/ Voltages in excess of these may be applied for short-term tests if voltage difference does not exceed 44 volts.
4/ For supply voltages less than ±20 V dc, the absolute maximum input voltage is equal to the supply voltage.
5/ For device types 04, 06, and 07 only, this rating is ±1.0 V unless resistances of 2 kΩ or greater are inserted in
series with the inputs to limit current in the input shunt diodes to the maximum allowable value.
6/ Short circuit may be to ground or either supply. Rating applies to +125°C case temperature or +75°C
ambient temperature.
7/ For short term test (in the specific burn-in and life test configuration when required and up to 168 hours
maximum) T_J = +275°C.
2