H4005 Datasheet, PDF (2/6 Pages) List of Unclassifed Manufacturers – ISO 11 784 / 11 785 COMPLIANT READ ONLY CONTACTLESS IDENTIFICATION DEVICE

EM MICROELECTRONIC-MARIN SA
H4005
Absolute Maximum Ratings
Operating Conditions
Parameter
Symbol Conditions
Maximum AC peak Current induced ICOIL
on COIL1 and COIL2
± 30 mA
Parameter
Operating Temperature
Maximum coil current
Symbol Min. Typ. Max. Units
Top -40
+85 °C
ICOIL
10 mA
Power Supply
AC Voltage on Coil
VDD -0.3 to 7.5 V
Supply Frequency
Vcoil
fcoil
14*
Vpp
100
150 kHz
Storage temperature
Electrostatic discharge maximum
to MIL-STD-883C method 3015
Tstore
VESD
-55 to +200°C
1000 V
Table 2
*) The AC Voltage on Coil is limited by the on chip voltage
limitation circuitry.
Table 1
Stresses above these listed maximum ratings may cause
permanent damage to the device.
Exposure beyond specified operating conditions may affect
device reliability or cause malfunction.
Handling Procedures
This device has built-in protection against high static voltages or
electric fields; however due to the unique properties of this
device, anti-static precautions should be taken as for any other
CMOS component.
System Principle
Fig. 3
Transceiver
Transponder
Oscillator
Antenna
Driver
Data
Decoder
Filter &
Gain
Demodulator
Data received
from transponder
Coil 1
H4005
Coil 2
Signal on
Transponder coil
Signals on coils
Signal on
Transceiver coil
RF Carrier
Data
2